LED dimmable driver 3W

The LED dimmable driver 3*1W is a perfect substitute for the traditional silicon-controlled dimmable driver. It is a matter of retrofitted cost, the one HMINLED publishes on the page is cheaper than the traditional one. In addition, it is compatible with most dimmers all over the world, which will work silently and smoothly. The property of narrow raised temperature and a little generated heat long the lifespan up to 10,000 hours. It can be used in a dry environment only. Any damp places to use the dimmable transformer is prohibited.

It devises with PWM technology, without high frequency, audible noise. Stable quality is ensured by various designs, such as reliable output short circuit, overcurrent, open circuit and overtemperature protection.

Fitting for many lights, such as LED ceiling light, LED track lamp and others near the ceiling.

It is accepted to customize dimensions and other modules customers want.
 
Specification

Dimmension: 40*28*22mm
Input voltage: 180-245VAC 50/60HZ (PM us if you need 110VAC)
Power:3W
PF: 0.9
High efficiency: 72%
Output current: 300mA ± 5%
Output voltage: DC 3v-12V
Dimmable range: 10%  -100% isolated driver
 
Instruction for wiring

The dimmable transformer is equipped with two white cables at the input end. One is for power in, another is for connecting the silicon-controlled dimmer. The output end comes with a red (LED +) and a white cable(LED -). The red cable goes to the positive of the LED light, while the white one connects the negative pole.

Something below you have to read to avoid breaking the dimmable driver and your LED light.

Distinguish the input and output end clearly and connect correctly, then turn on your light.

Before powering on, make sure the output end has already been connected. If you operate wrongly, what I mean is that power is on but the output hasn't been loaded. At the moment, please cut the power and then wait for the stocked electricity fully released. At last, connect the LED light. It will blow out your LED lamps if you plug the appliance into driver immediately.