Your shopping cart is empty!
HMINLED 4ft T8 LED Light Tube, 22W 2400LM, Ballast Bypass, Dual-end or Single-end Powered, 4 Foot T8 T10 T12 LED Replacement, Milky or Clear Cover
HMINLED 4ft T8 LED Light Tube, 22W 2400LM, Ballast Bypass, Dual-end or Single-end Powered, 4 Foot T8 T10 T12 LED Replacement, Milky or Clear Cover
4
11
$39.99 $52.99
Ex Tax: $39.99
Ex Tax: $39.99
Read the following sentences before installation, we suppose every customer has read before purchasing.
Ballast must be removed or bypassed if you want to replace the traditional fluorescent with the HMINLED light shown on this page.
The working environment should be dry and away from vapour.
The primary difference between double-end and single-end as below
Double - end means the live and neutral lines are connected to different ends. choose this type when replacing fluorescent bulbs.
Single - end can work only when the live and neutral lines are connected to the same end.
There are three potential risks if messed up
The light will break soon.
The fuse blows out.
It will trip the air switch or other equivalents.
As an experienced manufacturer in the led industry. Here we publish the most concerned questions from buyers as follows. Welcome to consult us if you have any questions about our products.
Q: Can the led tube replace the fluorescent lamp?
A: Sure, it can be installed into your traditional fluorescent fixture after the existing ballast is removed or bypassed. As far as I know, many 4ft fluorescent models used in the USA number is f32t8/xxx, so don't hesitate to buy this light shown on the page if you wanna save electricity bill while offering much illumination than before.
Q: How to wire if I am going to install your led to a new fixture?
A: 110v or 277v Live wire at an end, neutral at the opposite one.
Q: Does it fit for a non-shunted tomestomb or shunted?
A: Both are ok.
Q: Can the led light tube be installed in commercial buildings?
A: Absolutely, it would work with 277v
Q: Can I buy and use this light for T12 fixture?
A: Go ahead if that base is the same as T8, which shows in my picture, named G13. Only the diameter is different between T12 and T8. T12's is 1 1/3 inches, T8's is 1 inch.
Tips: T8 couldn't be installed in the T5 fixture.
About po box
Please fill in your physical address in order. Because po box is only recognized by USPS.
| Related Specification of Product | |
| Power | 22 Watts |
| Operating Voltage | AC 85 -285V |
| Item Length | 4ft / 1.2m |
| Connectors | Bi-Pin |
| Base | G13 |
| Bulb Shape Code | T8, fitting for T12 |
| Lumens | 2400 LM |
| Customized Service Accepted ? | Yes |
| Warranty | 2 years |
| Trade Terms | |
| Item Location | the United States and China. Customers in America will receive products in 3 - 5 days. |
| Retail Available ? | Yes |
| Wholesales Available ? | Yes |
| Free Shipping ? | Yes |
| IOSS Number | For customers from Europe, tell us your IOSS while ordering |
| Lead-time | 1 day |
Related Products
